阳春飞瓶建材有限公司

Preliminary Judgment Method for Failure of Tool Lathe of CNC Lathe in Shandong Province
    Listen to 1) When receiving the maintenance request, you should listen carefully to the operator to reflect the phenomenon, the place where the question should be asked to clear, in order to rule out the problems caused by human factors. 2) Listen to the knife to operate the sound in order to observe whether there is abnormal noise.
    Look at 1) to see whether the knife running process is normal. 2) to observe the accuracy of parts and parts of the chip surface traces, in order to determine whether the turret lock, repeat positioning is good.
Turn to For some of the failure of the knife, do not rush to disassemble, you can manually turn the turret. For the four-position tool holder, the end of the worm has a 6mm hexagonal hole, first remove the section where a sealed screw, you can use a hexagonal wrench or screwdriver to rotate the worm, so that the turret for positioning, locking The
    Taian sea number of machinery main products: horizontal inclined bed CNC lathes, vertical CNC lathes, wheel CNC lathes, CNC turning centers, CNC tube thread lathes, CNC milling machines, CNC machining centers, the purchase of CNC lathes to select the sea, Yes, order phone +86-13953800780.
    More CNC lathe knowledge at http://laixicanyin.top/